Description

The P1000 is designed for the long-range competition shooter and works great in F-Class also. It is available in right bolt, left load, right eject only, long and short, 308 and mag faces. It is available in 1.35 diameter. Both actions have our standard benchrest 1.0625 x 18TPI x 1.115 headspace tenon to help hold the heavier longer barrels used in this competition.

• Receiver Material: 416 Stainless hardened to 42 Rockwell
• Receiver Length: TAC30 and Predator Short – 7.850”
  • Wraith Short (integral lug) – 8.037”
  • Predator Medium – 8.200”
  • TAC30 and Predator Long – 8.700”
  • Wraith Long (integral lug) – 8.887
  • P1000 short – 8.265
  • P1000 V long – 9.155”
  • TAC338 – 9.165”
  • Tac408 – 10.25”
• Receiver Diameter: Predator, Predator V, TAC30, & TAC300 – 1.35” (Remington 700)
  • Wraith – 1.35”, across flats
  • P1000 – 1.35” or 1.55”
  • TAC338 – 1.40”
  • TAC408 – 1.45” or 1.60”
• Headspace Short, Medium, Long, Wraith – .700”
  • P1000 – 1.115”
  • TAC338 – 1.000”
  • TAC408 – 1.100”
  • Headspace tolerance is held to +/- .001”
• Tenon threads Threads are made with a single point boring bar and indexed to top center of action.  This allows any barrel ever fitted to a Stiller Action to be screwed onto any other Stiller Action without need for re-headspacing or re-indexing.
• Bolt Design TAC30, TAC300, PREDATOR, WRAITH – .700” diameter
  • TAC338, TAC408 – .750” diameter
  • One piece fluted on top and sides but not the bottom so that flutes will not interfere with magazine lips. TAC actions have straight bolt handle and PREDATOR actions have swept bolt handle.  Bolt knob is threaded.  TAC actions have large knob and PREDATOR actions have small knob.  Aftermarket knobs can be swapped out by user or gunsmith.
• Bolt Stop: On side of receiver opposite bolt handle above the stock line
• Bolt Throw: 90 degree
• Bolt Material: Chrome Molly hardened to 42 Rockwell
• Bolt Coating: Proprietary double layer coating makes them as smooth as glass
• Firing Pin: Fluted Stainless Steel, .068 diameter tip, Chrome silicon spring
• Extractor/Ejector: Modified M16 type extractor, Rem 700 style pin ejector
• Recoil Lug: 416R Stainless parallel sided or tapered.  .187” (Rem700 standard), .250” or .300” produced in house and surface ground to .0002” tolerance.