Predator Short

$995.00$1,070.00

Clear
SKU: N/A Category:

Description

The Predator action is designed for hunting use. It can also be used for competition. It is a 416R stainless steel action with a Remington 700 style footprint. It is available in both single shot and repeater versions with both right and left bolt. Short actions have 223, 308 and magnum boltfaces, long actions have 308 or magnum boltfaces. The 223 boltface uses the sako style extractor, while the others use a modified M16 type. The Predator has a number of features that factory actions lack. It has an extended magazine well for the handloader who likes to seat his bullets longer than factory ammo. It uses the most dependable extractor available today and has an enlarged primary extraction camming surface. It uses #6 screws for scope base mounting – As of 9/18 we are transitioning the Predator series to #8 screws as we use up the #6 bodies. The bolt is one piece, hand lapped to the action and fluted for better in field function. The firing pin is fluted for faster lock time and is fully supported within the bolt body. The bolt handle is threaded for the bolt knob of choice.

  • Receiver Material: 416 Stainless hardened to 42 Rockwell
  • Receiver Length: TAC30 and Predator Short – 7.850”
    • Wraith Short (integral lug) – 8.037”
    • Predator Medium – 8.200”
    • TAC30 and Predator Long – 8.700”
    • Wraith Long (integral lug) – 8.887
    • P1000 short – 8.265
    • P1000 V long – 9.155”
    • TAC338 – 9.165”
    • Tac408 – 10.25”
  • Receiver Diameter: Predator, Predator V, TAC30, & TAC300 – 1.35” (Remington 700)
    • Wraith – 1.35”, across flats
    • P1000 – 1.35” or 1.55”
    • TAC338 – 1.40”
    • TAC408 – 1.45” or 1.60”
  • Headspace Short, Medium, Long, Wraith – .700”
    • P1000 – 1.115”
    • TAC338 – 1.000”
    • TAC408 – 1.100”
    • Headspace tolerance is held to +/- .001”
  • Tenon threads Threads are made with a single point boring bar and indexed to top center of action.  This allows any barrel ever fitted to a Stiller Action to be screwed onto any other Stiller Action without need for re-headspacing or re-indexing.
  • Bolt Design TAC30, TAC300, PREDATOR, WRAITH – .700” diameter
    • TAC338, TAC408 – .750” diameter
    • One piece fluted on top and sides but not the bottom so that flutes will not interfere with magazine lips. TAC actions have straight bolt handle and PREDATOR actions have swept bolt handle.  Bolt knob is threaded.  TAC actions have large knob and PREDATOR actions have small knob.  Aftermarket knobs can be swapped out by user or gunsmith.
  • Bolt Stop: On side of receiver opposite bolt handle above the stock line
  • Bolt Throw: 90 degree
  • Bolt Material: Chrome Molly hardened to 42 Rockwell
  • Bolt Coating: Proprietary double layer coating makes them as smooth as glass
  • Firing Pin: Fluted Stainless Steel, .068 diameter tip, Chrome silicon spring
  • Extractor/Ejector: Modified M16 type extractor, Rem 700 style pin ejector
  • Recoil Lug: 416R Stainless parallel sided or tapered.  .187” (Rem700 standard), .250” or .300” produced in house and surface ground to .0002” tolerance.

KEEP UP WITH STILLER’S!

Stay connected with our latest offers, updates and events!

Go top