TAC 30

$1,054.00

Clear
SKU: Tac-30 Category:

Description

From tactical shooting to long-range hunting, the TAC 30 action is precision-machined for the highest accuracy at distance. A Remington 700 clone, the TAC 30 is bead-blasted 416R stainless steel and will fit any stock with a Remington short action inlet. TAC 30 actions are available with 223, 308, and magnum bolt faces. The 223 bolt face uses the Sako style
extractor, while the others use a modified M16 type. The magazine cutout is the same as a Remington 700. They have #8 screw holes for scope base mounting. One-piece Picatinny rails with 0 or 20 moa cant are available. All tactical actions feature a screw-on bolt knob. The bolts have a new proprietary coating that makes them as smooth as glass.
Receiver Material: 416 Stainless hardened to 42 Rockwell
Receiver Length: 7.850”
Receiver Diameter: 1.35” (Remington 700)
Headspace: 1.100” Headspace tolerance is held to +/- .001”
Tenon Threads: Threads are made with a single-point boring bar and indexed to the top center of the action. This allows any barrel ever fitted to a Stiller action to be screwed onto any other Stiller action without need for re-headspacing or re-indexing.
Bolt Design: .700” diameter. One piece fluted on top and sides but not the bottom so that flutes will not interfere with magazine lips. TAC actions have straight bolt handle and PREDATOR actions have swept bolt handle. Bolt knob is threaded. TAC actions have large knob and PREDATOR actions have small knob. Aftermarket knobs can be swapped out by user or gunsmith.
Bolt Stop: On side of receiver opposite bolt handle above the stock line
Bolt Throw: 90 degree
Bolt Material: Chrome Molly hardened to 42 Rockwell
Bolt Coating: Proprietary double layer coating makes them as smooth as glass
Firing Pin: Fluted Stainless Steel, .068 diameter tip, Chrome silicon spring
Extractor/Ejector: Modified M16 type extractor, Rem 700 style pin ejector
Recoil Lug: 416R Stainless parallel sided or tapered. .187” (Rem 700 standard) or .300” produced in house and surface ground to .0002” tolerance.

Go top